The new wireless trigger from Pixel HK are the most hottly awaited trigger to come out since the Pocket wizard FlexTT5 and MiniTT1. The Kings offer fully TTL (ETTL) information transfer from camera to the flash via 2.4Ghz radio. they also promise full High Speed Syncing (HSS) of upto 1/8000s.
Here is the description from Pixel themselves:
Product Function For Canon1. Support Canon E-TTL.
2. Up to 3 difference group and 7 combination on the flash transceiver.
3. Support EOS E-TTL II.
4. When using the EOS EX II series flash, you can set difference setting on difference group, available to set 1/1~1/128 flash output, totally 23 difference levels.
5. When using EOS EX II series flash, you can adjust the
flash exposure compensation from camera.
6. Support all the shutter speed, sync speed up to 1/8000s;using the PC socket control the studio ight which also support 1/8000s sync speed.
7. Multi control the speedlite or studio light.
Support maximum performance equipment 1/8000S synchronization and 1/4000S synchronous depending on the camera‘s highest shutter speed
Support flash: | 580EX II,580EX,430EX II,430EX,550EX |
Vice factory flash: | |
Support through camera external flash control menu within the camera flash control :40D,50D,60D,5D,5D Mark II,7D,1D Mark III,1D Mark IV,1Ds ,1Ds Mark II,Support this function can through the camera flash control within the camera menu control
Support through camera external flash control menu within the flash control:Canon 580EX II, 430EX II;Metz AF - 56
Function
1 | Support camera menu control flash output power |
2 | Support camera menu Settings flash output mode |
3 | Support exposure compensation |
4 | Support ae lock |
5 | Support camera Settings grouping |
6 | Support three flash group of output different power flash |
7 | Support manual transmitters setting on grouping flash |
8 | Support the former shade synchronization, high-speed synchronization |
9 | Support high-speed synchronous shadow room lights |
10 | Support other brands compatible with flash high-speed synchronization and TTL flash (Metz,SIGMA,Sunpak,Nissin) |
11 | Support other brands compatible with flash high-speed synchronization and TTL flash (May not support the high-speed synchronization and TTL flash) |
12 | Support update equipment program |
13 | Support a launcher control multiple receptors work |
14 | Support flash focusing lights work |
15 | Don‘t support three flash modes such as output different group - TTL and M model E while flash |
16 | Don‘t support multiple stroboscopic |
17 | Don‘t support. After shade synchronous |
18 | Don‘t support Canon wireless flash system |
19 | Don‘t support surrounded exposure |
20 | Don‘t support through the camera menu control EX series flash output model and parameters |
Wireless system
System model : | FSK 2.4GHz Wireless System |
Operation Range: | |
Channel: | 7 |
Properties
| E-TTL,TTL,M |
Synchronous mode : | Former shade, high-speed synchronization |
Operation Range: | 100M |
| Three categories (7 kinds of mode) |
Synchronous speed: | 1/8000S |
Compatible with flash: | Airborne flash light, shadow room lights, outdoor flash light |
Trigger mode
Transmitter : | Output support TTL mode, input support PC, hot boots triggered |
Receiver: | Output support TTL, support hot boots, cable interface triggered |
Interface
Transmitter : | USB, PC cable input socket, hot boots input and hot boots output |
Receiver: | USB, PC cable outlet, hot boots output |
Power Supply
Applicable battery : | TX : AAX2pc (support 1.2 V rechargeable batteries) RX: AAX2pc (support 1.2 V rechargeable batteries) |
Standby Time: | TX : 5 Years RX: 250 Hours |
Working Time: | TX: 100 Hours RX: 120 Hours |
Thanks the
Pixel for the information
No comments:
Post a Comment